|
Regenerative Monoblock Self Priming 2880 RPM
- OSWAL Regenerative self priming mono block pump set are the products of the expertise of highly qualified technical team with a stage wise rigid inspection method under TQM concept.
- OSWAL Regenerative self priming mono block pump set are powered by a totally enclosed fan cooled, A.C induction motor, and complete absence of suction trouble, suitable for long hours duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Well-balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance power. Shaft made out of best quality steel, precision ground of ample size, which helps to transmitting the rated Horsepower. All single-phase versions up to 1.0 HP are incorporated with Thermal Over Load protector.
- Application of Regenerative self priming mono block pump set Hospitals, Water circulation systems, Water supply systems of Gardening, Nurseries, Domestic water supply, Multi-storeyed Building & Industries.
- OSWAL Regenerative self priming mono block pump set are of good self priming capacity, dynamically balanced rotating parts, optimal, High operating efficiency, high working pressure & designed for wide voltage fluctuations.
REGENERATIVE SELF PRIMING MONOBLOCK PUMPS SET 2900 RPM CONFIRM TO IS: 8472.
Specification
Details
|
2880 RPM
|
Power Range
|
0.5 HP. & 1 Ph.
|
Version
|
200 - 240 V, 50 Hz, A.C. - 1 Ph.
Permanent Split capacitor (PSC)
Incorporated with Thermal Overload Protector.
|
Speed
|
2900 rpm.
|
Type of duty
|
S1 (Continuous)
|
Degree of protection
|
IP 54
|
Class of insulation
|
'B'
|
Flow rate upto
|
50 lpm.
|
Delivery Head upto
|
42 mtr.
|
Self-priming capacity
|
15 ft.
|
Suction lift upto
|
25 ft.
|
Normal suction x delivery size in inches
|
1 x 1
|
Material of Construction - Pump
Part Name
|
Material
|
Pump Casing
|
Cast Iron
|
Motor Frame
|
Aluminium Alloy
|
Impeller
|
Bronze
|
Shaft
|
SS 410 / E.N. 8
|
Sealing
|
Mechanical seal
|
Pumped Liquids
Clean, thin, non-aggressive, clear, cold, fresh non polluted & without abrasives, solid particle or fibres shall mean the water having the following characteristics.
Maximum Liquid Temperature
|
55oC (max.)
|
Permissible amount of sand
|
25 gm/m3 (max.)
50 gm/m3 (125-200 mm)
|
Chlorine ion density
|
500 ppm (max.)
|
Allowable solids
|
3000 ppm (max.)
|
Specific gravity
|
1.004 (max.)
|
Hardness (drinking water)
|
300 (max.)
|
Viscosity
|
1.75 x 106 m2/sec (max.)
|
Turbidity
|
50 ppm silica scale (max.)
|
pH value
|
6.5 to 8.5
|
| SELF PRIMING PUMPS |
| SINGLE PHASE SELF PRIMING MONOBLOCK PUMPSET 2880 RPM CLASS (ALUMINIUM BODY) |
| MODEL |
K.W. |
H.P. |
DELV SIZE IN MM |
TOTAL HEAD IN METERS |
| FEET |
13 |
26 |
39 |
52 |
66 |
79 |
92 |
105 |
118 |
131 |
144 |
157 |
170 |
184 |
197 |
| METERS |
4 |
8 |
12 |
16 |
20 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
52 |
56 |
60 |
| OMP-1 ACTIVA-(AL) |
0.37 |
0.5 |
25X25 |
DISCHARGE |
|
|
1500 |
1200 |
1020 |
780 |
480 |
300 |
|
|
|
|
|
|
|
| OMP-1A NSP-SUMO |
0.37 |
0.5 |
25X25 |
|
1400 |
1080 |
700 |
360 |
120 |
|
|
|
|
|
|
|
|
|
| OMP-1A SUMO-(AL) |
0.37 |
0.5 |
25X25 |
|
1480 |
1080 |
700 |
360 |
120 |
|
|
|
|
|
|
|
|
|
| OMP-1B PLATINA-(AL) |
0.37 |
0.5 |
25X25 |
|
1540 |
1140 |
780 |
420 |
120 |
|
|
|
|
|
|
|
|
|
| OMP-2 EXCLUSIVE-(AL) |
0.37 |
0.5 |
25X25 |
|
|
1560 |
1260 |
1080 |
840 |
540 |
360 |
120 |
|
|
|
|
|
|
| OMP-3 SUPER FLOW-(AL) |
0.37 |
0.5 |
25X25 |
|
2820 |
2220 |
1680 |
1200 |
360 |
|
|
|
|
|
|
|
|
|
| OMP-4 ACTIVA-(AL) |
0.75 |
1 |
25X25 |
|
|
|
|
|
|
|
|
1620 |
1380 |
1320 |
1020 |
840 |
480 |
240 |
| OMP-5 EXCLUSIVE-(AL) |
0.75 |
1 |
25X25 |
|
|
|
|
|
|
|
|
1740 |
1500 |
1440 |
1140 |
960 |
600 |
360 |
| OMP-7-JUMBO-(AL) |
0.75 |
1 |
25X25 |
|
|
|
|
|
|
|
|
1980 |
1740 |
1680 |
1380 |
1200 |
840 |
600 |
|
contact@oswalpumps.com
Send SMS
